The burner is a common laboratory tool used for heating, sterilization and combustion.
Flame sterilization remained until now a routine task carried out in many microbiological, clinical and life science laboratories.
Rocker laboratory burners with piezo ignition provide an adjustable flame with temperatures up to 1300°C.
You can refill the burner when it runs out of fuel.
Watch the following video to get more…
June 17th, 2022 – Tangential flow filtration (TFF) is a filtration method that allows the filtrate to flow in a direction parallel to the membrane. It thus creates much less clogging of the filter membrane, producing higher concentration within shorter period, and processes concentration and diafiltration at the same time. ROCKER® Scientific, the Taiwanese […]
June 17th, 2022 – Tangential flow filtration (TFF) is a filtration method that allows the filtrate to flow in a direction parallel to the membrane. It thus creates much less clogging of the filter membrane, producing higher concentration within shorter period, and processes concentration and diafiltration at the same time. ROCKER® Scientific, the Taiwanese […]
May 31st, 2022 – ROCKER® Scientific, the leading laboratory filtration solution provider from Taiwan, released their first parallel evaporator ConVap. ROCKER® was established in 2007 and was known for their unique vacuuming pump lines that make filtration easy. Applied with Rocker’s vacuum controlling technology, ConVap will make concentration easy by keeping all controls at one […]
May 17th, 2022 – ROCKER® Scientific, the leading laboratory filtration solution provider from Taiwan, released two vacuum controlling units at once in early May, the Pilot 100 Vacuum Controller and DC Chem 610 Pro, an integrated vacuum controlled pump system. ROCKER® was established in 2007 and was known for their unique vacuuming pump lines […]
ROCKER® Scientific, the leading laboratory filtration solution provider from Taiwan, had recently released their first Graphite Hotplate, Mars, and extended their product offerings in sample pre-processing and ultra-metal analysis fields. Mars Graphite Hotplate is made of PTFE-coated isostatic graphite. With zero metal element exposure, Mars Graphite Hotplate is the most suitable heater for ultra-trace metal […]
